Guzzi Parts and accessories for sale

Print Page | Close Window

Parts for sale Tonti

Printed From: guzziriders.org - moto guzzi forum
Category: Sales and Wants
Forum Name: Guzzi Parts and accessories for sale
Forum Description: Get rid of those bits you don't need.
URL: http://www.guzziriders.org/forum_posts.asp?TID=15645
Printed Date: 27 Mar 2026 at 04:02
Software Version: Web Wiz Forums 12.03 - http://www.webwizforums.com

Topic: Parts for sale Tonti

Posted By: Ken-Guzzibear
Subject: Parts for sale Tonti
Date Posted: 13 Aug 2024 at 16:53

Been looking in my shed and a tidy up I have not yet checked these for size but 3 Cylinders I think V1000 round might be 850 but will measure tomorrow.

A Bevel box

A shaft drive for big block and one I think must be from a small block

There are 2 Front timing covers from a Convert

I have a Crankcase as well with timing chain & gears and complete crank with rods

If any one is interested I am happy to take pics I will be popping them on flea bay in Sept.

Make me decent offers they are not scrap.

I have a fair few other bits I will just pop on line Stuff like a Bosch Voltage reg and a fuse box for spade fuses only did a clean up today too hot to get pics done etc put this here first

I am near Loughborough Leics

Cheers

Ken

-------------
The Older i Get, The Better I Was

Replies:

Posted By: AdrianW
Date Posted: 14 Aug 2024 at 09:21

Ken,

I have found on my V50III project that turning the rear wheel makes a louder "clank" than my V35II, sound appears to be coming from the UJ area.

If the smaller shaft is from a small block and has 12 splines & doesn't have play I could be interested..

Cheers,

Adrian

Bristol UK

Posted By: Ken-Guzzibear
Date Posted: 14 Aug 2024 at 11:41

I know nothing about small block bikes but I will be getting pictures of the bits you would have to figure out if it's ok. At the moment got a few other things to do this here retirement is so busy lol

-------------
The Older i Get, The Better I Was

Posted By: AdrianW
Date Posted: 14 Aug 2024 at 12:25

Thanks Ken...

Cheers,

Adrian

Bristol UK

Posted By: Ken-Guzzibear
Date Posted: 19 Aug 2024 at 13:11

Had a look it's more than 12 spline so not what you want

-------------
The Older i Get, The Better I Was

Posted By: AdrianW
Date Posted: 19 Aug 2024 at 13:34

thanks Ken....

Cheers,
Adrian

Bristol UK

Posted By: PHIL H
Date Posted: 23 Aug 2024 at 12:04

Hi Ken, I've been building a SP3 custom. It's been a real challenge and after 200 miles on it discovered the crank is scrap !
Do you still have the crankcase, timing gears and crank for sale and if so what are they off ?
Thanks Phil

-------------
1993 SP3
Triumph Tiger GT PRO
1976 Honda CB 550 project

Posted By: russellp
Date Posted: 28 Aug 2024 at 16:27

Hello Phil,

If Ken is unable to help you I have a bottom end (crank, rods, bearings) and timing gears engine number VG 204xxx which I believe is from an SP or G5.

Let me know if you’re interested.

Russell

Posted By: PHIL H
Date Posted: 28 Aug 2024 at 21:57

Thanks Russell but I picked an engine up from Gutsibits yesterday. It's obviously been sat for years so always good to have a back up.

Many thanks Phil

-------------
1993 SP3
Triumph Tiger GT PRO
1976 Honda CB 550 project

Posted By: russellp
Date Posted: 06 Sep 2024 at 16:19

Hello Phil,

Pleased you’re sorted.

If you don’t mind me asking, how much did you pay for the engine?

I ask because I have a rebuilt LM2 engine and clutch which I intend to sell and I would like to have a feeling for its value.

Regards, Russell

Posted By: Ken-Guzzibear
Date Posted: 17 Sep 2024 at 15:57

Just put loads of items on E-Bay including a pair of VHB30 Dellorto carbs

-------------
The Older i Get, The Better I Was