guzziriders.org - moto guzzi forum Homepage
Forum Home Forum Home > Technical > Loop Frames
  New Posts New Posts RSS Feed - Unreliable Ignition
  FAQ FAQ  Forum Search   Events   Register Register  Login Login

Unreliable Ignition

 Post Reply Post Reply Page  12>
Author
Message Reverse Sort Order
Brian UK View Drop Down
Moderator Group
Moderator Group
Avatar

Joined: 13 May 2014
Location: Surrey
Status: Offline
Points: 8720
Post Options Post Options   Thanks (0) Thanks(0)   Quote Brian UK Quote  Post ReplyReply Direct Link To This Post Topic: Unreliable Ignition
    Posted: 23 Oct 2017 at 22:03
To take the theory a bit further, the induction (ignition) coil requires a sharp cut of the current through the primary to induce a large spike of voltage in the secondary.
If the condenser isn't there, or is in poor condition, you get arcing across the points as they open, thus the cut in current isn't as fast, so you get a weaker spark.
Brian.

Better 5 minutes late in this world than years early in the next.
Back to Top
Jerry atric View Drop Down
Senior Member
Senior Member
Avatar

Joined: 24 Nov 2014
Location: Wiltshire
Status: Offline
Points: 1846
Post Options Post Options   Thanks (0) Thanks(0)   Quote Jerry atric Quote  Post ReplyReply Direct Link To This Post Posted: 23 Oct 2017 at 20:11
Brilliant. New potato or main crop, which is best?
Back to Top
Mike H View Drop Down
Senior Member
Senior Member
Avatar

Joined: 21 May 2014
Location: East Anglia
Status: Offline
Points: 5626
Post Options Post Options   Thanks (0) Thanks(0)   Quote Mike H Quote  Post ReplyReply Direct Link To This Post Posted: 23 Oct 2017 at 20:05
Originally posted by johnno johnno wrote:

Originally posted by Brian UK Brian UK wrote:


The condenser is there to stop the points arcing, so if you see sparking on the points, the probability is that the condenser has seen it's best days.


I never knew that


Yep.


.

"Chicken nuggets don't dance on a Tuesday."
Back to Top
Ken-Guzzibear View Drop Down
Moderator Group
Moderator Group
Avatar

Joined: 13 May 2014
Location: Sileby Leics
Status: Offline
Points: 5075
Post Options Post Options   Thanks (0) Thanks(0)   Quote Ken-Guzzibear Quote  Post ReplyReply Direct Link To This Post Posted: 23 Oct 2017 at 18:58
The thing "condenser" is another description for Capacitor it stores charge .......BUT bad ign after 20 ish miles could be faulty coil touch it if very hot it is brokedid ..... the ign system as actually very reliable BUT condenser breaking down gives sparks and gives the coil a hard time coils are not that expensive, good connections and good earths are paramount all reasonably easy to check
The Older i Get, The Better I Was
Back to Top
Dave P. View Drop Down
Senior Member
Senior Member


Joined: 12 Jan 2015
Location: Northants
Status: Offline
Points: 2317
Post Options Post Options   Thanks (0) Thanks(0)   Quote Dave P. Quote  Post ReplyReply Direct Link To This Post Posted: 23 Oct 2017 at 16:06

TO LIVE OUTSIDE THE LAW YOU MUST BE HONEST.

1971 V7 Special. 1972 850GT.
1970 T120 Bonnie. 2009 500 Bullet.
Back to Top
red leader one View Drop Down
Senior Member
Senior Member
Avatar

Joined: 07 Oct 2014
Location: Cullercoats
Status: Offline
Points: 3012
Post Options Post Options   Thanks (0) Thanks(0)   Quote red leader one Quote  Post ReplyReply Direct Link To This Post Posted: 23 Oct 2017 at 15:54
You know everyfing Brian.
Back to Top
johnno View Drop Down
Senior Member
Senior Member


Joined: 19 Jul 2014
Location: loughborough uk
Status: Offline
Points: 3316
Post Options Post Options   Thanks (0) Thanks(0)   Quote johnno Quote  Post ReplyReply Direct Link To This Post Posted: 23 Oct 2017 at 15:49
Originally posted by Brian UK Brian UK wrote:


The condenser is there to stop the points arcing, so if you see sparking on the points, the probability is that the condenser has seen it's best days.


I never knew that
GSXR1100 L ,Moto Guzzi 650tt/ntx.750xpa,t5 850.1100 sport,1100 sport corsa rider
Back to Top
Brian UK View Drop Down
Moderator Group
Moderator Group
Avatar

Joined: 13 May 2014
Location: Surrey
Status: Offline
Points: 8720
Post Options Post Options   Thanks (0) Thanks(0)   Quote Brian UK Quote  Post ReplyReply Direct Link To This Post Posted: 23 Oct 2017 at 15:05
The condenser is there to stop the points arcing, so if you see sparking on the points, the probability is that the condenser has seen it's best days.
Brian.

Better 5 minutes late in this world than years early in the next.
Back to Top
Ken-Guzzibear View Drop Down
Moderator Group
Moderator Group
Avatar

Joined: 13 May 2014
Location: Sileby Leics
Status: Offline
Points: 5075
Post Options Post Options   Thanks (0) Thanks(0)   Quote Ken-Guzzibear Quote  Post ReplyReply Direct Link To This Post Posted: 23 Oct 2017 at 12:42
Yes sparky point is usually condenser if you look in the thread general electrical issues ...page 2 scroll down to Rita ignition help Brian has put in a link to Euro spares on there the info re timing the rita also gives very useful info for timing a big block Guzzi in their "Text for installing rita to T3 Guzzi it may help ie each tooth on the starter ring =3.75degrees therefore 33degrees BTDC = 9 teeth .....sure helped me ....
The Older i Get, The Better I Was
Back to Top
Rick B View Drop Down
Guzzino
Guzzino
Avatar

Joined: 09 Oct 2017
Location: Ohio
Status: Offline
Points: 9
Post Options Post Options   Thanks (0) Thanks(0)   Quote Rick B Quote  Post ReplyReply Direct Link To This Post Posted: 23 Oct 2017 at 01:20
Hi All,

I had that 73-V7 with ignition problem - right cylinder firing intermittently.  After replacing the second bad condenser.  I've read that you're a likely buy a bad new condenser as have an old on go out.  Seems true in this case. Don't know if they will help anyone but the point associated with the bad condenser sparked a lot.  Now that the new one is in, the spark is barely visible, just like the other side.  So, maybe a sign of a bad condenser is a "sparky" point. 

Anyway, the bike is now sparking nicely and ran pretty well for a 20 mile ride (about mile 6 turned the odometer over the 10,000 mile mark).  But it seems like it should have a bit more acceleration at high rpms (5000-ish).  When I checked the timing with a light, the right cylinder mark is showing below the window at 2000rpms and the left cylinder mark is nowhere to be seen, although, I can hardly find the LC timing mark when the bike isn't running. 

Would you all recommend advancing the timing a bit and then messing with the carbs?  Or trying to fine tune the carbs and leave the timing for now?  I've read that it's ignition THEN carburetor.  But I'm not sure how much faith I have in those timing marks.   

Thanks for your thoughts, again. 

Rick.


Rick Busselle
Back to Top
Brian UK View Drop Down
Moderator Group
Moderator Group
Avatar

Joined: 13 May 2014
Location: Surrey
Status: Offline
Points: 8720
Post Options Post Options   Thanks (0) Thanks(0)   Quote Brian UK Quote  Post ReplyReply Direct Link To This Post Posted: 09 Oct 2017 at 23:03
Sparks failing after a short time is certainly one symptom of a failing coil. When I had it happen, I could do about 2 miles before it stopped. Waited 5 minutes then another 2 miles. Took a long time to get home.
Brian.

Better 5 minutes late in this world than years early in the next.
Back to Top
Rick B View Drop Down
Guzzino
Guzzino
Avatar

Joined: 09 Oct 2017
Location: Ohio
Status: Offline
Points: 9
Post Options Post Options   Thanks (0) Thanks(0)   Quote Rick B Quote  Post ReplyReply Direct Link To This Post Posted: 09 Oct 2017 at 22:01
Good thoughts both.  I'll keep you all posted.
Best.
Rick Busselle
Back to Top
Ken-Guzzibear View Drop Down
Moderator Group
Moderator Group
Avatar

Joined: 13 May 2014
Location: Sileby Leics
Status: Offline
Points: 5075
Post Options Post Options   Thanks (0) Thanks(0)   Quote Ken-Guzzibear Quote  Post ReplyReply Direct Link To This Post Posted: 09 Oct 2017 at 19:03
if condenser proves to be ok check coil as you say it runs fine for a short while, No real experience of a loop BUT once had a cut out happen on the 76 Vthou ....drove me nuts ...it was a blocked breather on the tank flap ...... I had put a new seal on it and had not positioned it quite right ....just some ideas no clue if it helps, always go for the cheap, easy stuff first ....
The Older i Get, The Better I Was
Back to Top
Mike H View Drop Down
Senior Member
Senior Member
Avatar

Joined: 21 May 2014
Location: East Anglia
Status: Offline
Points: 5626
Post Options Post Options   Thanks (0) Thanks(0)   Quote Mike H Quote  Post ReplyReply Direct Link To This Post Posted: 09 Oct 2017 at 16:09
Originally posted by Brian UK Brian UK wrote:

It's not unknown for new condensers to be faulty especially if they are old stock.
 

This reminds me, by all accounts newly made ones tend to rubbish, i.e. are badly made.

can you possibly still use the original ones?


"Chicken nuggets don't dance on a Tuesday."
Back to Top
Rick B View Drop Down
Guzzino
Guzzino
Avatar

Joined: 09 Oct 2017
Location: Ohio
Status: Offline
Points: 9
Post Options Post Options   Thanks (0) Thanks(0)   Quote Rick B Quote  Post ReplyReply Direct Link To This Post Posted: 09 Oct 2017 at 13:55
Thank you, Sirs.

Someone, probably one of you guys, said that the likelihood of getting a bad new condenser is about the same as a 30 year old one failing.

The fact that it runs really well for a few miles here and there makes me think I'm chasing wiring problem.  I'll trace the wiring back to the box.

I appreciate these forums and all the hard to find expertise that they can tap into. 

Will check regularly and read your thoughts.  But I won't pester with minutia until I've eliminated the wiring as a problem. 

Thanks,
RickBeer
Rick Busselle
Back to Top
 Post Reply Post Reply Page  12>
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 12.00
Copyright ©2001-2018 Web Wiz Ltd.

This page was generated in 0.047 seconds.