Diagnostic tool |
Post Reply |
Author | |
HaydnR
Falcone Joined: 13 May 2014 Location: Fife Status: Offline Points: 67 |
Post Options
Thanks(0)
Posted: 13 Nov 2014 at 20:44 |
Guzzidiag an essential piece of kit for home servicing and fault finding on bikes fitted with fuel injection. Software created and tested by guzzi enthusiasts is free but I'm sure donations are greatly appreciated. All you require is a laptop and a couple of easily available leads as described in the attached link and a bit of computer know how.
Edited by HaydnR - 13 Nov 2014 at 23:17 |
|
Brian UK
Moderator Group Joined: 13 May 2014 Location: Surrey Status: Offline Points: 17641 |
Post Options
Thanks(0)
|
Which ECUs are covered? looks like the 5AM and 15M/RC only. Corrected link.
Edited by Brian UK - 13 Nov 2014 at 22:49 |
|
Brian.
Better 5 minutes late in this world than years early in the next. |
|
HaydnR
Falcone Joined: 13 May 2014 Location: Fife Status: Offline Points: 67 |
Post Options
Thanks(0)
|
All guzzi ecu are covered, I have used it on P8, 15M/RC and 5AM. You can also read and write maps which the technoresearch kit cannot.
|
|
Brian UK
Moderator Group Joined: 13 May 2014 Location: Surrey Status: Offline Points: 17641 |
Post Options
Thanks(0)
|
I know it can do more than Technoresearch.
|
|
Brian.
Better 5 minutes late in this world than years early in the next. |
|
Ken-Guzzibear
Moderator Group Joined: 13 May 2014 Location: Sileby Leics Status: Offline Points: 9454 |
Post Options
Thanks(0)
|
yeh the puter know how is the bit I fall down on would love to be shown haw to use all this via laptop n v11 lemans
|
|
The Older i Get, The Better I Was
|
|
TurcoLoco
Falcone Joined: 20 Jan 2019 Location: California Status: Offline Points: 38 |
Post Options
Thanks(0)
|
Hi everyone,
I noticed this is not a fresh thread but I still wanted to ask if this tool can be used for a 2017 Stelvio or not? If so, which apps do I need to download (no idea what ECU model is mine)? Also, what exactly would I need to connect the laptop running this app to the bike please? Cheers and TIA! |
|
Brian UK
Moderator Group Joined: 13 May 2014 Location: Surrey Status: Offline Points: 17641 |
Post Options
Thanks(0)
|
Simple answer, yes. Go to the link above, scroll down and find the one for your model.
|
|
Brian.
Better 5 minutes late in this world than years early in the next. |
|
TurcoLoco
Falcone Joined: 20 Jan 2019 Location: California Status: Offline Points: 38 |
Post Options
Thanks(0)
|
Thank you, Brian.
Perhaps, a not simple answer is what I need. I did scroll through the list but there is hardly any details on what apps are applicable nor anyway to know what my stelvio's ECU model is. Where do I get that info from? If I had to guess, I am thinking 5AM but not certain since Stelvio is not listed. Also, how do I connect to the bike using the USB port, is there a cable adapter from USB to KKL Guzzi connector? Can anyone provide a bit more hand-holding please? Thank you.
Edited by TurcoLoco - 06 Jun 2020 at 20:44 |
|
Brian UK
Moderator Group Joined: 13 May 2014 Location: Surrey Status: Offline Points: 17641 |
Post Options
Thanks(1)
|
I'm sure somewhere on that page it tells you what cables to buy, but basically it's USB to EOBD and EOBD to Fiat 3 pin. Search this forum for Guzzidiag and you will find lots of references and much more information. |
|
Brian.
Better 5 minutes late in this world than years early in the next. |
|
TurcoLoco
Falcone Joined: 20 Jan 2019 Location: California Status: Offline Points: 38 |
Post Options
Thanks(0)
|
Thank you again, Brian.
I saw the info but couldn't tell what exactly I would need. I guess I was hoping for a direct connection from USB to whatever Stelvio used. If using two separate connectors get the job done then so be it. As far as searching the forum for more info on this topic goes, I have, and hit only 4 threads where none had any related info which is why I asked here. One of my concerns was a quick/easy way to reset TPS if it is indeed a must-do prior to doing the TBS. I never had the need to purchase any hardware or software to reset the TPS or to even reset it prior to doing a TBS on any other bike so it seemed a bit odd. If this free diagnostic tool does the job along with other stuff then I am all for it but there is hardly any info on which apps applicable to a Stelvio (5AM?) and also how to go about installing and running/using it. It is great the tool exists but lack of a manual is not doing it any good. Cheers, TL
|
|
Brian UK
Moderator Group Joined: 13 May 2014 Location: Surrey Status: Offline Points: 17641 |
Post Options
Thanks(0)
|
Scroll down to the bottom and it tells you the cables. And you need the reader software for the 5AM. It is not neccessary to reset the TPM before doing a throttle body balance. You reset the TPS after the balance as altering the balance adjuster will alter the TPS setting.
|
|
Brian.
Better 5 minutes late in this world than years early in the next. |
|
TurcoLoco
Falcone Joined: 20 Jan 2019 Location: California Status: Offline Points: 38 |
Post Options
Thanks(0)
|
Just got both cables/adapters in the mail!
I have downloaded the 5AM sw as mentioned, I will be checking it out soon! :) |
|
I support BLM
(Biker Lives Matter) |
|
Wheel Enthusiast
Senior Member Joined: 06 Jun 2021 Location: Katy, Texas Status: Offline Points: 149 |
Post Options
Thanks(0)
|
Just checking in to see how you made out with your software project. I'm trying to figure out how to download diagnostic software applicable to a 15RC ECU. Jason
|
|
You can sleep in your car but you can't drive your house.
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |