Breva 1200 |
Post Reply | Page 123> |
Author | |
Howard6040
Falcone Joined: 02 Mar 2019 Location: Uk Status: Offline Points: 22 |
Post Options
Thanks(0)
Posted: 02 Mar 2019 at 19:31 |
Hi, an proud owner of brev a 1200.Been servicing it and have 2 issues 1 resetting service notification on dash screen ? And 2 starter relay 15 amp fuse has blown twice! Any suggestions gratefully received. Thank s
Howard 6040
|
|
Guzzi1000SE
Senior Member Joined: 23 Dec 2018 Location: South Yorkshire Status: Offline Points: 590 |
Post Options
Thanks(0)
|
Hi Howard, welcome to the forum. Have you seen the section titled General Electrical issues and the topic Click no Crank?
|
|
Mike
Falcone Joined: 20 Jul 2016 Location: Huddersfield Status: Offline Points: 35 |
Post Options
Thanks(0)
|
I had a similar problem with the fuse on my Breva 750. I was advised to use a 30 amp fuse instead, and 5 years and nearly 20k miles later have not had a problem.
|
|
Brian UK
Moderator Group Joined: 13 May 2014 Location: Surrey Status: Offline Points: 17641 |
Post Options
Thanks(0)
|
The Click, no Crank topic covers this problem. Is your battery good? A failing battery will cause that fuse to blow as well.
|
|
Brian.
Better 5 minutes late in this world than years early in the next. |
|
helmetbolt
Senior Member Joined: 17 Apr 2017 Location: Co Durham Status: Offline Points: 512 |
Post Options
Thanks(0)
|
Hello, and welcome to the forum.
|
|
2001 California Special. (Modified)
|
|
Howard6040
Falcone Joined: 02 Mar 2019 Location: Uk Status: Offline Points: 22 |
Post Options
Thanks(0)
|
Thanks Brian and Mike for your comments. Will carefully check battery voltage for starters. Temporarily have fitted 20 amp fuse and carry spare fuses to keep me on the road. Will examine starter relay wiring and see if colours match those given in the thread. If problem persists may bite the bullet and do the mod although I am only a occasional leckie!! My bike is 2008 by the way. Regards
|
|
Jerry atric
Senior Member Joined: 24 Nov 2014 Location: Wiltshire Status: Offline Points: 3367 |
Post Options
Thanks(0)
|
Welcome. Nothing worse than electrical snags but this is where you will find the answer.
|
|
Brian UK
Moderator Group Joined: 13 May 2014 Location: Surrey Status: Offline Points: 17641 |
Post Options
Thanks(0)
|
Resetting the service note is a case of going into the service menu on the dash. You will need the service code for your bike, which you will find in the service code topic in CARC. You can find user manuals etc. here. As far as the dash menus are concerned, they are the same as the 1200 Norge. I can't see a user manual for the 1200 Breva in there.
|
|
Brian.
Better 5 minutes late in this world than years early in the next. |
|
johnno
Senior Member Joined: 19 Jul 2014 Location: loughborough uk Status: Offline Points: 5582 |
Post Options
Thanks(0)
|
Hi and welcome
|
|
1100 sport corsa , Yam R1, guzzi 650tt rider
|
|
Howard6040
Falcone Joined: 02 Mar 2019 Location: Uk Status: Offline Points: 22 |
Post Options
Thanks(0)
|
Hi johnno, catch up mar/apl what do think brev a 1200? Should be able to keep up now?
|
|
Jeanette
Falcone Joined: 12 Feb 2019 Location: Lincolnshire Status: Offline Points: 26 |
Post Options
Thanks(0)
|
Hi and welcome to the forum hopefully these guys will help you get sorted
|
|
johnno
Senior Member Joined: 19 Jul 2014 Location: loughborough uk Status: Offline Points: 5582 |
Post Options
Thanks(0)
|
Nice one , you still got 750 ?
|
|
1100 sport corsa , Yam R1, guzzi 650tt rider
|
|
Howard6040
Falcone Joined: 02 Mar 2019 Location: Uk Status: Offline Points: 22 |
Post Options
Thanks(0)
|
No, traded in ,you should see it on ebay, dealer Manchester area.
|
|
Howard6040
Falcone Joined: 02 Mar 2019 Location: Uk Status: Offline Points: 22 |
Post Options
Thanks(0)
|
Hi Brian and Mike, took the plunge and examined the wiring under the breva seat with the intention of doing the starter relay mod. However, found the starter relay and identified
Pin87 chunky black wire Pin30 chunky orange wire Pin86 small gauge green&orange wire Pin85 small gauge blue&green wire Found no connection between pin 87 and pin 85 and therefore unable to do the mode!? Am I missing something? Noted all wires neaty go back into the loom harness. Bike started ok once relay reconnected(still have 20 amp fuse in place). Any suggestions. Thanks howard
|
|
Brian UK
Moderator Group Joined: 13 May 2014 Location: Surrey Status: Offline Points: 17641 |
Post Options
Thanks(0)
|
What sort of relay was it you found? The Breva had different relays, no numbering on connections.
|
|
Brian.
Better 5 minutes late in this world than years early in the next. |
|
Post Reply | Page 123> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |